1837 "Indian" Canoe paddle - Michigan

Found on a past listing on LiveAuctioneers:

A 19th Century Native American Michigan Canoe Paddle.  Old hand written note attached that reads "Indian Canoe Paddle 1837 Found in Grand River near mouth of Bellamy Creek, by T.B. North…of 1837-16 Years old at that time".  Very worn with some separation and losses.  57 1/2" long.  

c.1914 Smithsonian Chippewa Knotty Spruce Paddle Replica

It's been over 10 years since I built a small birchbark canoe and the spruce board building bed has been sitting idle in the cottage garage since then. With space running out, a decision was made to cut up and use some of of the wood and see if more paddles could be carved. Back then, the boards were simply selected for to be free of warping. Plenty of knots didn't matter. As such, there really wasn't any clear sections with grain ideally suited to an attractive looking paddle.

However, I recall posting about a paddle described as a "Chippewa Woman's Paddle" listed in a dated publication from the Smithsonian's Bureau of American Ethnology.

Bureau of American Ethnology

BULLETIN 86 - Chippewa Customs

1929

Plate 53

Image Source Link

The original caption from the bulletin also included the following description:

The specimen illustrated is a woman's canoe paddle (pl. 53, a) and is 4 feet 10 inches long, with blade 22 inches long and 4 1/4 inches wide. A man's paddle is usually heavier, longer, and of a somewhat different shape...

The Smithsonian also has the original black & white photo used in the publication. While the bulletin and article was published in 1929, the archival record mentions the photo is dated to 1914.

Negative 596 D 79, National Anthropological Archives, Smithsonian Institution

Creator:   ANONYMOUS

Title:   Canoe paddle (left) and snow shovel (right)
Provenance:   Submitted by Frances Densmore.
Culture:   Chippewa, Ojibwa Indians
Local Number:   NAA INV 9277300
OPPS NEG 596 D 79

This 100+ year old knotty paddle was the inspiration needed to use some of the plank boards. I started with a 60inch piece of the board and used a saw to cut various stop cuts along the shaft and blade. Then hacking away with the axe, the basic paddle shape emerged...

The blade was also thinned down with an axe and then the rest worked down with my home-made crooked knife that has served well over the years. The knots certainly dulled the blade and made carving a bit tricky, but in a leisurely afternoon a functional paddle emerged from the wood stock.

In keeping with the rough nature of the original inspiration, I smooth the carving as best as I could but left all the knife marks on the paddle. It won't be sealed so it the surface can develop a weathered patina, but a description of the paddle has been burned onto the blade face...

Noel Jerome Bark Canoe

Happened to swing by Algonquin Outfitters at Oxtongue Lake a while back and immediately noticed the well preserved bark canoe suspended over the cash register.

Manager Gord Baker was kind enough to supply some notes about the interesting history of the boat. Apparently it was acquired by original owner, Bill Swift Sr. as payment after someone couldn't pay back their debt with cash. Local bark canoe historian and restorer Rick Nash believes the construction style is consistent with Noel Jerome, a famed Algonquin builder from Rapid Lake, Quebec.