Another unique paddle design replicated for the upcoming WCHA assembly is from an illustration by an anonymous artist. Dated to between 1750-1780, the painting in the collection of the City of Montreal archive illustrates an Algonquin couple in period clothing. The male figure holds a paddle over his shoulder.
Algonquine, Algonquin . - [ca 1750]-[ca 1780]
Ville de Montréal. Section des archives
CA M001 BM007-2-D27-P004
The paddle has a fairly unique shape, a short blade design with recurved shoulders, a lengthy shaft and a distinct bobble shape grip. It seems very reminiscent of modern day SUP paddles hitting the market.
In any event, I had an idea to re-use an incomplete blank that was begun years ago and never finished. At the time, I used a narrow maple board and laminated some walnut edges to make a whitewater paddle with an experimental Battenkill Grip.
Laminating walnut edging
Original whitewater blank
In the end, I never really did much whitewater paddling and the finishing the blnk no longer became a priority. The short blade design seemed suitable to re-purpose into this display paddle but the overall shaft length was too short. So a simple shaft splice was done with some maple stock and the shaft extended. Here is a photo after the splice and with the blade roughly re-cut.
Ended up cutting the shaft down a bit more and used the bits to laminate a cube at the grip. The was eventually worked down to form a bobble grip similar to the original artwork. I had some blue and red Tremclad Rust paint on hand for the blade decoration, but ended up using a torch to burn the shaft and grip to a charred finish. Here is the final result...
Circa 1750-1780 Algonquin Paddle Replica
Email this post
No comments:
Post a Comment