Monday, June 22, 2015

Leather Paddle Hanger

A while back, I wrote a post about Norquay Company, a Canadian startup which is trying to put an artistic touch to utilitarian paddles. Their ever-growing series of artisan canoe paddles are manufactured by Teal Canoe in New Liskeard, Ontario with bold patterns painted on the blade.

Also featured on the site is their Leather Paddle Harness, a simple and rustic looking way of suspending a paddle.

Norquay Leather Paddle Harness

With the recent completion of my 2nd son's heirloom paddle, I wanted to hang it and his brother's paddle in the basement man cave. However, I've found that most paddle hangers only function properly with a standard shaped pear grip and not with the elongated style grips featured on my own paddles. With a batch of leather scraps waiting to be used, I set out to make two of these styles of hangers.

Leather Scraps

I ended up using pieces roughly 4" long by 1.5" wide but this can be enlarged or reduced depending on what you want. Holes were punched in the corners.

An edging tool used to give some borders.

In my case, a piece of scrap lace was used that would not match the final color, but it didn't matter since it would not be visible in the final hanging. The pic below shows the partial lacing pattern (the final knot has not been tied yet)

After stamping my son's name and staining in a mahogany color, the leather harness was placed on the grip loosely. The tension created by pulling on the loop (right side) created an effective friction fit on the northwoods style grip. This would then been hung on a standard picture frame hook.

Here's a pic of it suspended in place...

And a final pic of my boys' heirloom paddles on the basement wall next to my bourbon shelf...

No comments:

Post a Comment

Newer Posts Older Posts Home Page